DIS
High-Speed Forming
x
Deep Draw-Forming
Flow Channel Forming
Its high SPM and long stroke enable
deep draw-forming at a rate of 180 parts per minute.
Product Features
Enables 2-Out (Front and Back) Forming Using High-Accuracy Deep-Draw Dies Designed for Thin Sheets
Transfer dies are arranged in two rows (in the front and in the back) to achieve a production rate of 180 pieces/minute, which is double the SPM setting. And material yields are also boosted approximately 5.3%. Other features include an upper die fall-prevention mechanism and a function to monitor the wear condition of the draw-forming punches (option). In addition, the flywheel and motor have been optimized to achieve high continuous working energy.
A High-Speed, Long-Stroke Press That Enables High-Speed Deep-Draw Forming
・The SN value (stroke x revolutions) is 1.7 times higher than that of conventional presses.
・Resistance during lube distribution is reduced to improve lube supply efficiencies.
・Equipped with a pneumatic counterbalancer that both suppresses the material flow velocities and enables a smaller installation footprint.
A Mechanical Transfer Feeder That is Fully SynchronizedFully Synchronized with the Press
The advance and return motions are driven by a cam mechanism linked to the press crankshaft. The clamping and unclamping operation timing can be adjusted for each forming stage to achieve high-speed conveyance.
Product Specifications
| Model | DIS-1600 |
|---|---|
| Capacity | 1600kN |
| Stroke Length | 230mm |
| Continuous No-Load SPM | 40~90min⁻¹ |
| Die Height | 430mm |
| Slide Area | 1500×580mm |
| Bolster Area | 1800×760mm |
| Continuous Working Energy | 15380J@90min⁻¹ |
Catalog Download
